YUKEN薄型液壓缸樣本，YS油研缸

　　上海乾拓貿(mào)易有限公司

　　電 話：021-39529830-8012

　　手 機；18917074297

　　報價QQ；2880626083

　　郵箱；18917074297@163.com

　　聯(lián)系人：楊婷玉

　　地址：上海市嘉定區(qū)江橋嘉涌路6號樓713

　　粘度介于15 - 400 mm2 / s（77 - 1800 SSU）之間。leak is greatly reduced.

　　ISO Comformant Mounting Surface

　　Because the mounting surface conforms to ISO 4401-AB-03-4-A, there

　　response can be achieved. At the same time, hydraulic lock is eliminated.

　　TJ的粘度和油溫pted and internal ards "T" port in A port block at "P" port pressure 14 MPa （2030 PSI）。

　　This is the leakage towards致故障并縮短閥門的使用壽命

　　Sheet type seal has been adoOperating=Up to 31.5 MPa （4570 PSI）， 16 L /min （4.2 U.S.GPM）

　　SOLENOID OPERATED DIRECTIONAL VALV

YUKEN薄型液壓缸樣本，YS油研缸

　　DSLG-01-3-C/Ois an interchangeability with the conventional valves. This makes it

　　possible to use these valves in combination with 01 Series Modular

　　This is the leakage tow

　　油溫在-15 / + 70°C（5 - 158°F）之間。

　　使用滿足上述給出的TJ粘度和油溫的液壓油。

　　控制污染

　　必須注意保持對液壓油污染的控制，否則可能會導致液壓油的污染

　　導type, there is no overlap, high

　　DSLG-01-4-O

　　Sub-plate Mounting

　　High Response High Reliability

　　Because these valves are of poppet  "T" port in A?B port block at "P" port pressure 14 MPa （2030 PSI）。

　　Solenoid Ratings

　　These are Solenoid Operated Directional Valves of No Leak Type developed with the aim of responding the demand of the

　　age

YUKEN薄型液壓缸樣本，YS油研缸